Aluminium veneer,
formed to the drawing.
One material.
Many geometries.
Aluminium veneer gives the design team a rigid, stable face material that can be folded, curved, punched and finished — without the weight and maintenance of stone.
Ruiheng fabricates veneer panels from AA3003 and AA5052 aluminium, with PVDF fluorocarbon coating, powder coating or decorative wood, stone and bronze finishes. Panels are built to the project's fixing strategy: visible seams, concealed hooks, cassette systems or bespoke sub-frames.
Systems
08 configurationsFlat-seam veneer
Visible joints, screw-fixed and sealed. The most direct way to create a controlled, linear facade.
Seamless veneer
Tight panel gaps and concealed fixings for a calm, monolithic surface.
Double-curved & 3D panels
CNC-formed and rolled geometry for complex envelopes, soffits and feature volumes.
Perforated & acoustic veneer
Round, square or bespoke perforation patterns, with fleece or acoustic backing where required.
Carved & open-cell panels
CNC-carved screens and open-cell panels for depth, shadow and ventilation.
Wood-grain & stone-grain
Decorative aluminium faces that carry the warmth of timber or the look of stone without the weight.
Bronze brushed & special finishes
Directional brushing, anodised tones and bespoke surface treatments.
Column cladding & screens
Square, round and curved column casings, plus decorative screens for interior and exterior use.
Technical data
Typical range| Alloy | AA3003 H24 / AA5052 H24 |
|---|---|
| Panel thickness | 1.5-4.0 mm (project-specific) |
| Coating system | PVDF fluorocarbon, 70% resin; 2-, 3- or 4-coat |
| Dry film thickness | 2-coat ≥30 µm · 3-coat ≥40 µm · 4-coat ≥55 µm |
| Length / width tolerance | ±1.0 mm (≤2,000 mm) · ±1.5 mm (>2,000 mm) |
| Diagonal tolerance | ±2.0 mm (≤2,000 mm) · ±3.0 mm (>2,000 mm) |
| Flatness | ≤1.5 mm per 1.5 m |
| Adhesion | Cross-cut 100/100, no detachment |
| Impact resistance | 50 kg·cm, no cracking or detachment |
| Salt-spray resistance | 4,000 hours |
| Gloss | 30-40% (typical) |
| Service life | 20+ years for PVDF system |
Values are typical and confirmed against the approved shop drawing, alloy and coating system. Project-specific test reports are available on request.
Finishes
Representative rangeCustom RAL colours, wood-grain references, stone-grain references and brushed directions are matched to approved samples before production.
On site
Selected applications
Need this system on your next project?
Send your drawings and performance requirements. We will review the details, propose a build and confirm lead time.
Specifying aluminium veneer?
We can work from architectural drawings, facade schedules or a performance brief. Send the package and we will come back with a build proposal.